Skip to content

SIDE BY SIDE · FACTS ONLY

Lansweeper vs Sevco: asset inventory facts side by side

SHORT ANSWER

Lansweeper describes 3 of the five approaches on the pages we read and Sevco describes 2; they differ on CAASM aggregation, Agent-based inventory, CMDB-centred inventory and Exposure management. On collection, Lansweeper offers its own agent and also works without one and Sevco works without new agents. Many estates run two of these approaches together, so the question is often which pair, not which one; we do not score either.

By The Inventory Desk · CAASM Finder · Published 2026-10-11

Desk research from public vendor pages read on 27 September, 11 October and 15 October 2026. Profiles follow our published method; we did not run the products.

How do their approaches compare?

Lansweeper: described for 1 of 5 approaches, with a condition for 2.CAASMConnectconditiondescribedAGENTCollectdescribednot in sourcesEASMOutside-innot in sourcesnot in sourcesCMDBRecordconditionnot in sourcesEXPOPrioritisenot in sourcesdescribed
  • Top bar: Lansweeper
  • Lower bar, lighter: Sevco Security
  • Full bar: described on the vendor's pages we read
  • Hatched bar: described with a condition (another product, a higher tier, or part of the approach)
  • Stub: not in our sources (it may exist; we did not find it)
The bars show what each vendor's own pages describe, or how your answers weigh the five approaches. They are not a measure of how well a product works.

What are the facts, side by side?

From each vendor's own pages. Differs marks rows where the recorded status or check value differs.
FactLansweeperSevco Security
Positioning

An IT asset discovery and inventory product with three systems for the three places Lansweeper says assets live: the network including OT, off-network laptops, and cloud.

Sevco describes itself as an exposure management platform that centralizes vulnerabilities and security control gaps, prioritizes them, and automates and validates remediation, with an accurate asset inventory and asset intelligence as its foundation.

Deployment

Agentless scanning with passive detection on by default, an optional IT agent for remote laptops, and a traffic sensor.

Source: Lansweeper product · Read 27 Sep 2026

Installs in 30 minutes or less with no agent, scanner or network monitor, and with easy remote setup.

Source: Sevco Security platform · Read 15 Oct 2026

CAASM aggregationDiffersWith a condition

Its own discovery does most of the work; shown integrations include ServiceNow, Jira Service Management, Microsoft Sentinel, Splunk and Armis, and duplicates merge on MAC address, serial number and hostname.

Source: Lansweeper homepage · Read 27 Sep 2026

Described

Aggregates and correlates data from existing IT and security tools behind and in front of the firewall; an Asset Correlation Engine handles correlation, reconciliation and deduplication.

Source: Sevco Security platform · Read 15 Oct 2026

Agent-based inventoryDiffersDescribed

Agentless scanning and passive detection by default, plus an optional IT agent for laptops that rarely touch the network.

Source: Lansweeper product · Read 27 Sep 2026

Not in our sources

Not described on the pages we read.

External attack surface managementNot in our sources

Not described on the pages we read.

Not in our sources

Not described on the pages we read.

CMDB-centred inventoryDiffersWith a condition

Feeds ITSM and CMDB tools such as ServiceNow, Jira Service Management, HaloITSM, Freshservice and TOPdesk.

Source: Lansweeper homepage · Read 27 Sep 2026

Not in our sources

Not described on the pages we read.

Exposure managementDiffersNot in our sources

Not described on the pages we read.

Described

Describes itself as an exposure management platform that centralizes vulnerabilities and security control gaps, prioritizes them, and automates and validates remediation.

Source: Sevco Security home page · Read 15 Oct 2026

Servers and network devicesDiffersMatches

The network, including OT, is one of its three discovery systems.

Source: Lansweeper homepage · Read 27 Sep 2026

Not in our sources
Cloud workloadsDiffersPartly

Cloud discovery is documented; providers are not named on the product page.

Source: Lansweeper product · Read 27 Sep 2026

Not in our sources
SaaS applicationsDiffersPartly

AI usage tracking is documented; broader SaaS discovery is not.

Source: Lansweeper product · Read 27 Sep 2026

Not in our sources
Identities as assetsNot in our sourcesNot in our sources
Off-network laptopsDiffersMatches

Off-network laptops are one of its three discovery systems, through an optional agent.

Source: Lansweeper homepage · Read 27 Sep 2026

Not in our sources
OT and IoT devicesDiffersMatches

IT, OT, cloud and IoT.

Source: Lansweeper product · Read 27 Sep 2026

Not in our sources
Internet-facing discoveryNot in our sourcesNot in our sources
Offers its own agentDiffersMatches

Optional IT agent.

Source: Lansweeper product · Read 27 Sep 2026

Not in our sources
Works without new agentsMatches

Agentless scanning; passive detection runs by default.

Source: Lansweeper product · Read 27 Sep 2026

Matches

No agent, scanner or network monitor to install.

Source: Sevco Security home page · Read 15 Oct 2026

Merges records from several sourcesDiffersPartly

Deduplicates on MAC address, serial number and hostname.

Source: Lansweeper homepage · Read 27 Sep 2026

Matches

An Asset Correlation Engine handles correlation, reconciliation and deduplication.

Source: Sevco Security platform · Read 15 Oct 2026

Feeds or updates a CMDBDiffersMatches

ServiceNow, Jira Service Management, HaloITSM, Freshservice and TOPdesk are shown integrations.

Source: Lansweeper homepage · Read 27 Sep 2026

Not in our sources
Cross-source queries and reportsNot in our sourcesNot in our sources
Workflows, tickets or actionsPartly

Sends inventory to ITSM tools; actions of its own are not described.

Source: Lansweeper homepage · Read 27 Sep 2026

Partly

Action Center offers pre-defined automated remediation, validated on the asset rather than when a ticket closes.

Source: Sevco Security home page · Read 15 Oct 2026

Price or pricing basis publishedDiffersMatches

Starter from €270 and Pro from €474 a month, billed annually; free up to 100 assets; Enterprise from 10,000 assets.

Source: Lansweeper pricing · Read 11 Oct 2026

Not in our sources
Free tier or trialDiffersMatches

14 days of full access, then free up to 100 assets.

Source: Lansweeper pricing · Read 11 Oct 2026

Not in our sources
Platform it is part ofNoneNone
Integrations

Jira Service Management, ServiceNow, HaloITSM, Freshservice, TOPdesk, Microsoft Sentinel, Splunk and Armis.

Source: Lansweeper homepage · Read 27 Sep 2026

Aggregates data from existing IT and security tools; an integration count or named integrations are not published on the pages we read.

Source: Sevco Security platform · Read 15 Oct 2026

Price

Published, billed annually: Starter from €270 a month (2,000 assets, one installation, service desk ticket-enrichment integrations only); Pro from €474 a month (2,000 assets expandable to 9,000, up to three installations, all integrations); Enterprise custom from 10,000 assets with full API access; free up to 100 assets after a 14-day trial. Prices were shown to us in euros and may vary by location.

Source: Lansweeper pricing · Read 11 Oct 2026

Not published

Not published.

Source: Sevco Security home page · Read 15 Oct 2026

Where do they differ?

  • CAASM aggregation: Lansweeper describes it with a condition; Sevco describes it.
  • Agent-based inventory: Lansweeper describes it; Sevco is not in our sources.
  • CMDB-centred inventory: Lansweeper describes it with a condition; Sevco is not in our sources.
  • Exposure management: Lansweeper is not in our sources; Sevco describes it.
  • Servers and network devices: Lansweeper matches; Sevco is not in our sources.
  • Cloud workloads: Lansweeper partly matches; Sevco is not in our sources.
  • SaaS applications: Lansweeper partly matches; Sevco is not in our sources.
  • Off-network laptops: Lansweeper matches; Sevco is not in our sources.
  • OT and IoT devices: Lansweeper matches; Sevco is not in our sources.
  • Offers its own agent: Lansweeper matches; Sevco is not in our sources.
  • Merges records from several sources: Lansweeper partly matches; Sevco matches.
  • Feeds or updates a CMDB: Lansweeper matches; Sevco is not in our sources.
  • Price or pricing basis published: Lansweeper matches; Sevco is not in our sources.
  • Free tier or trial: Lansweeper matches; Sevco is not in our sources.

Can they work together?

Neither vendor's pages we read name the other as an integration. That does not mean they cannot work together; ask both vendors.

Choose Lansweeper if

  • You want to find what is on the network yourself, including OT, without going through sales first
  • You need off-network laptops covered with a light, optional agent

Choose Sevco if

  • You want an asset inventory built from the tools you already run, with no new agents
  • You want remediation tracked until it is validated on the asset

Which limits should you check?

Lansweeper

  • SaaS coverage is limited to AI usage tracking on the pages we read, and identities are not described.
  • Merging what many security tools report is not described; deduplication uses MAC address, serial number and hostname.

Sevco

  • No price, trial, integration count or named integrations published on the pages we read.
  • Coverage of SaaS, identities, OT and external assets, query capabilities and data freshness are not described on the pages we read.

Questions people ask

Is Lansweeper or Sevco better?

Neither is scored on this site. Lansweeper describes 3 of five approaches and Sevco 2 on the pages we read, and they differ on 14 recorded facts. Which fits depends on where your assets live, whether you can install agents, your CMDB and your tools; the finder checks those.

Do Lansweeper and Sevco work with a CMDB?

Lansweeper: Matches. ServiceNow, Jira Service Management, HaloITSM, Freshservice and TOPdesk are shown integrations. Sevco: Not in our sources.

Do Lansweeper or Sevco publish prices?

Lansweeper: Published, billed annually: Starter from €270 a month (2,000 assets, one installation, service desk ticket-enrichment integrations only); Pro from €474 a month (2,000 assets expandable to 9,000, up to three installations, all integrations); Enterprise custom from 10,000 assets with full API access; free up to 100 assets after a 14-day trial. Prices were shown to us in euros and may vary by location. Sevco: Not published.

Read next

One of 55 side-by-sides. All side-by-sides